It’ll be $40 to do the sanwa swap. You’ll need to supply the sanwa parts.
I’ll have to ask my friend who makes my cases to see if he’ll do it since he has the tools to do this.
No rush on that, I thought I had gotten a hold of a empty T5 shell that I was going to mod but I was too late and it got sold. So I have to track down another T5 stick. But if you can find out any info, price etc. I would appreciate it.
Added a section to the first post for other items of mine for sale. For now its just a 360 madcatz fight pad (ken) that I dual modded with my new dual strike smd board.
hey gum you have a pic of your Dual Strike SMD board ? and it will be 8 button layout correct?
Yes it has all 8 buttons. It even has the ability to invert the triggers on madcatz controllers so no trigger hacking is required (just like what the ChImp). It does not have auto detection, but does have imp like switching ability by just holding the joystick in any direction or any punch or any kick. Start and select work and if pressed together they will press the guide button. Although home button does not register on ps3 yet (the laptop does recognize a button press). Once this has been fixed the firmware can be easily updated through usb.
Side by side size comparison between Toodle’s ChImp board and my dual Strike SMD board.
http://i79.photobucket.com/albums/j138/gocontourgo/Project%20DualStrikeSMD/th_2010-02-08202509.jpg
Closer look of the board wired up to the Fight Pad.
http://i79.photobucket.com/albums/j138/gocontourgo/Project%20DualStrikeSMD/th_2010-02-20001958.jpg
MC Cthulu RJ45 mod compatible with converters? I tried using plugging in the Playstation Cable to the RJ45 jack and then plugging it into a Dreambox which is a PS -> Xbox converter and I had no luck with anything but the star button and the stick.
I also know you can’t get cables for the Dreamcast so what options are there for a Dreamcast?
hey gum so that is ready to be shipped now? and will it be wired with qd’s or no?
Are you referring to the dual modded fight pad I’m selling? If so, I’m only selling it as a dual modded controller. I also won’t be selling it for the same price in the future. Its just a one time special deal.
what u mean? u putting it back in the ken case? so it wont be wired up
I have about 20 assembled boards that I can sell. I have one board already dual modded inside a madcatz fight pad that I’m also selling.
o i c i though you were selling a hacked duel modded pcb for 60 thats why i asked if it had qd’s
Ah ok. I understand now. I could provide that as a service though. $100 (plus $6 shipping) for a padhacked 360 board dual modded with my dual strike SMD board with QDs .
finished Shockwave3000’s mod. 360 TE -> RJ45 mod with usb and gc cords
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-03-01132004.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-03-01140221.jpg
Also finished blinky77’s stick too. 360 Marvel TE -> PS3 and PS2. Also remapped the buttons to match the standard TE layout.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-03-01162124.jpg
Does the Stick lose mic support after the mod? My Mic isn’t working properly I could hear my boys but they couldn’t hear me
How much would a dual mod run for a HRAP EX if I provided both a madcatz fightpad pcb for 360 and a dual ps2/ps3 pcb for the mod myself?
pm sent
You would need to check the mc thead to find out about compatibility issues. When you said xbox do you mean xbox1? If so, you can just use a usb2xbox1 cord and attach it to the usb plug.
As for dreamcast, I think you would have to use a psx->dreamcast converter.
It shouldn’t. Are you sure you didn’t have your mic on mute?
$60
This the thing you’re talking about?
yes sir
Hello.
I’m an old school player that unfortunately my custom stick that I built has unfortunately gotten a short. Only 1 button doesn’t work and it’s not a ground issue but I’m not getting any power from the pcb board to the power wire, despite all the other buttons are working. This was an old pad hack I have performed but due to time constraints I can’t take care of this at the moment and someone pointed me your direction. (I’m writing this from work, lol) All I really want is a new PSX pcb installed or if possible fix the current situation. What’s a fair price since I know what the job consists of and I know it’s gonna require some parts such as an extension cord, and MC board, wires and labor. Really would appreciate the answer good sir. PM please.
-FDK