Just curious why you went this route for the PS3 stick? auto detection?
Issue with the original ps3 pcb and to get auto-detect.
Oh, okay. I didn’t know if you needed the PS3 PCB.
I use my thumb for the d-pad, and my first 3 fingers (mostly the middle) for the buttons. Ideally, I’d like them next to RB and RT but I don’t know if you have enough room. Theoretically, putting them above the other buttons would work.
DigitlSamurai’s 360 TE-S multi-system mod with start/select/home buttons added to the metal panel:
Did some more work for Fatsaks.
Dual modded his 360 TE-S and led modded the ball top:
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-14210346.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-14210405.jpg
Multi-system modded a Tek case with led mod. They are all red when not pressed and turn blue when pressed.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26225505.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26225538.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26225631.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26232535.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26232603.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Fatsaks2/2012-02-26232643.jpg
gummo I need you to look at my TE stick for me
I forgot his name but he was with you when you guys were at SBV and he messed up his eye. but thats besides the point. My stick is kinda plinking itself sort of and i will explain…
In my matches when i do a Cr. HP with guile Sometimes he just automatic puts on his shades. i opened my stick up and i noticed that two solder points are kinda soldered together. and also i cannot press the guide button to get to the menu i always have to hold select and then press start to get to the menu.
I will be at final round.
Stop by our table during final round.
Sorry if this question has already been asked and unfortunately i will not be at FR but how much will you charge for dual modding a 360 pad to work on a ps3
$100+shipping
Finished up Phatty’s mod. Did a dual mod and installed leds into the buttons and ball top as well as changed the player indicator leds to blue. Also installed two buttons into the right side of the case for LB/LT.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Phatty/2012-02-29134334.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Phatty/2012-02-29134614.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Phatty/2012-02-29134640.jpg
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/Phatty/2012-02-29134701.jpg
Very good work on my fightstick. I can use it even better than I expected now. Thanks.
Gummo thanks for fixing my guide button at Final round. however i am only able to get the guide button to work on the ps3 lol. when i am on the xbox i cant get nothing to work not even when i hold select and press start lol. Any tips you could give me?
Is that the b15 stick?
nah i was the guy with the green buttons and bezzle
That came very nice :tup:
so yeah i just tested it on my ps3 and i was able to get my guide button to work but on the 360 i cant get it
Before you plug it in hold lk+mp+hk to enter 360 mode
yea i did that and attached it up to my laptop and the guide button does not light up when pressed
Guide is not supposed to light up on PC.
There is no assigned button for Guide on PC.
Different problem though with Guide not working on Xbox 360.
Is the Lock Switch set to Lock?
lock switch is set up unlock