I have an idea for how to dual mod a wired MS 360 pad. I’ll test it out this week add let you know the results.
I also have plans to dual wired mod a sixaxis controller.
I wasn’t sure if a regular controller could be done, everyone always talks about the 6 button controller.
I have to bump this, but major, major props to Gummowned for dual modding my Hori Fight Commander 3. I also want to thank him for removing the inserts I put in. The pad feels amazing and having 1 pad for both systems is even better. Yes I know the total price paid for this pad is the price of a TE stick $140 (I just dont have the time to get used to it) but I feel so much more better on a pad. So again super super props to Gummowned again.
Here’s pictures of jason24cf’s PS3 Hori Fighting Commander 3 that I modded for 360 and also rewired the triggers.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-17225047.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-18001154.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-18001733.jpg
Thanks for modding my custom stick, gummowned! The cthulu PCB is much more responsive on both PC and PS3 than the PS2 PCB that was in there. I am most excited about the cleanliness of the internals. The guy who built the stick for me sent it to me with a rat’s nest inside. I was never really happy with the stick just knowing what was inside and that any failures would be difficult to trace and fix. I am now happily gaming with a sweet stick!
Finished tRuEhOoD’s stick. 360 TE-S -> MC + GC cord.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-21180408.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-22155803.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-22155812.jpg
Also finished Steve’s stick. PS3 custom -> 360 plus LED arc-eye mod. Light up on press. Light up white when playing on ps3. Light up green when playing on 360.
http://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-23185157.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-23185218.jpghttp://i79.photobucket.com/albums/j138/gocontourgo/Finished%20Mods/th_2010-09-23185231.jpg
PM’ing to take advantage of Gumm’s amazing work.
saw the youtube video…very nice sir. great work.
Now that the table top arcade is done, idk what to do with it anymore. I wish I could find someone to sell it to so I could work on a new one.
Thank you for the case Gummowned. I dont know if you are still selling these but to those that are interested in a blank case they are pretty solid to work with.
http://shoryuken.com/f177/check-out-my-new-arcade-stick-thread-part-deux-201537/index529.html#post9607440
I still have several blank cases by Elis. That’s some really good work you did on one of them.
How much are the blank cases going for?
Furthermore, If I pre-ordered one of those new fangled Akishop PS360 PCBs and had it sent to you eventually, could you mount and prewire the pcb with a neutrik USB jack? And if yes to all of these, how much would that go for?
I have a custom AXISDAPTER wireless PS3 stick, could you triple mod it (wired or wireless) for ps2 and 360 as well as add Arceye? If so, how much would it cost?
discussed via aim 
I would have to remove the axisdapter and put in a Leo board instead to be abke to triple mod and led mod the stick. PS2 would be wired and you would have to choose if you want a wireless ore wired 360 controller used.
You are looking at $160 for the mod with parts.
What is the price difference between 360 wired and wireless, if there is one?
Alternatively, how much would it cost me if I were to ask for a case built with the following parts supplied, and xbox360, ps2 and arceye added:
JLF x1 (all parts)
30mm x8
24mm x3
JLF Harness
Sixaxis PCB
Did you already have a case or did you need a case?
$120 to add the 360/ps2/arceyes (and leo2)
I was thinking either upgrading my existing stick, or getting a new case and just providing the parts that I already have. How much would that be if I were to want a case to go with it?
The cases are $100. That would cover the stained & poly’ed case, plexi for top and bottom (with custom 6 button layout of your choice), and artwork.
looky looky Gum!
http://shoryuken.com/f226/seasons-beatings-stick-modding-services-featuring-gummowned-strogg-252044/
I replied back. Thanks Tim.