IS IT ME or does korean version have 30 mm holes that fit jap buttons as baseline now??
also this
"- Effortless installation and removal of 30mm buttons on top and 24mm buttons in the back"
Remove the plexi.
Omni always used 30mm holes on both sanwa and korean editions.
Feature list does not mean change list. Much of that is the same as the previous Omni. But hopefully, laugh changed the feet and bottom screws. The previous ones needed to go.
aaaaaaaaaaaw shit
how thick is the plexi on an omni?
It’s very thin
If it’s 30 mm holes for both sanwa and korean buttons, all I do is to have to buy the korean edition, and change the korean buttons to sanwa?
Can someone make a custom plexi or something, I want it to look like this, with only six buttons and also a start button. In the center of the box.
http://imageshack.us/photo/my-images/687/ieoncigcx.png/
http://imageshack.us/photo/my-images/805/bigimage01.png/
http://imageshack.us/photo/my-images/33/compare03.png/
http://imageshack.us/photo/my-images/651/zhjcntsic.png/
I don’t think you can, but you can swap out a Myoungshin’s shaft to the Taeyoung IIRC. So you do have the choice of a black shaft if you have a black Myoungshin lying around.
etokki doesnt sell taeyoung anymore do they ??
Exactly. I ran my Omni with a Crown fanta and seimitsu buttons for a while at one point just by removing the plexi.
You might want to contact the guys at tek-innovations for custom plexi. With enough demand, I am should they could make a product available.
i am really hoping the taeyoung sticks get back on the site soon. need another one for a 2 player stick i’m working on.
Does anyone know if the Myoungshin Fanta fits inside an Eightarc Fusion stick?
It should. I think it’s deep enough to fit one. But you need a replacement plate to get it to mount. IDK if blklightning sells any for the eightarc. If you have the tools and can finagle with it, you could do it yourself with your current plate, but then you won’t be able to fit your Japanese parts in there again and if something goes wrong, well you’re out your stick.
Sent from a phone, using an app that I purchased from an App Store, that appends this signature above my signature to make me look superior in social status to everyone else.
Dunno if anyone asking about being able to put sanwa buttons in but in the description on the site it says that [SIZE=14px]This is a pre-order for a Korean Edition Omni Arcade Stick, and release date is October 11, 2012. [/SIZE]***[SIZE=14px]All pre-orders will receive a Japanese plexi top included as a gift.[/SIZE]
I’m guessing this will solve the problem? Never used anything like this before but I’m wanting a dual mod stick and am getting more into tekken so this seems like a win win. I like where the start/back buttons are on this in comparison to the eightarc.
the issue is that kroean buttons are smaller then japanesse its other way around for korean joysticks u need a bigger hole to mount an korean joystick in, so i’m not 100 % but if korean ver omni have 30 mm holes its all good
Has anybody had an opportunity to use the Crown CWJ-303N and 303A stick variations yet? I’m just curious how different they are from one another, I see the 303N’s have Gersung microswitches which makes them pretty similar to the Myoungshin Fanta styles but I’m not familiar with the Matsushita’s in the 303A’s.
I’m looking to order the 303N as a backup to my Myoungshin but before I do I just want to make sure there’s not some reason in particular that I should be getting the 303A instead.
I have been toying around with the Omni Revision 3 for review. I just changed it from Korean parts to Japanese parts but in the process almost completely stripped two of my bottom screws. I am guessing the screws are relative of the older versions. What screws are they?
hi ryan
i ask a while for the makestick pro
my friend buy my Wooden stick, but he wanted the stick so badly ^^
i tried to get one
http://istmall.co.kr/shop/goods/goods_view.php?&goodsno=9992173&category=003
but its Korean only 
can you help or someone know where to get it else ?
You can email Laugh about any chance on distribution. I would still like to see the Joytron EXChanger too.
yeah i Hope he can Help
（≧∇≦）
Sent from my iPhone using Tapatalk
I’m unable to check out with the Omni (Korean edition) in my cart. Does it mean pre-orders are no longer accepted?