eTokki.com - The Shop for the Players by the Players

rteruyas · 2011-11-08T03:16:12.000Z

My PS button is shutting all the other buttons and joystick off when pressed while on PS3 using paewang pcb. XBOX seems to work fine.
Any idea what might be causing this?.Posted my problem in the paewang post, but never got an answer

Original post at: http://shoryuken.com/forum/index.ph…h-lots-of-pictures.92494/page-13#post-6032085

Thanks in advance guys!

THEQUEENOFLOVEHD · 2011-11-08T03:55:47.000Z

okay, walked up to Ace Hardware, bought some rubber grommets and longer M3 screws and the Crown fits just fine :tup:

I wonder if the CWL305 has good microswitches though…

Shughli · 2011-11-08T14:55:57.000Z

Hey Mr Laugh, can u check my order #6117. It still say “prosessing” in status.

Missing_Person · 2011-11-08T19:02:43.000Z

Could still be on hold since he was at Canada Cup.

I wouldn’t worry too much.

purple_haze · 2011-11-08T22:16:58.000Z

Ordered a 360 converter over the weekend and it still says processing. Like MP is saying I’m sure it’s because of Canada Cup. I’ll wait a couple more days before I try and contact them or freak out.

Shughli · 2011-11-09T00:46:11.000Z

hehe im not freaking out… its not first time ordered from him. ill wait didnt know he was absent…

LoonyToonsJacket · 2011-11-09T04:19:39.000Z

When I ordered my converters, my status said processing for about a week.

jmcrofts · 2011-11-09T12:03:01.000Z

OK so I am having a problem with my Omni. Somehow the mounting plate for the JLF has gotten horribly bent, like 20 degrees or so, and because of this the stick pokes out at a weird leftward angle. Is this a known problem? I’ve had my stick for less than a month.

Pygmalion · 2011-11-09T19:15:03.000Z

Okay, i got my omni sanwa sticks. I plugged them into my 360, but how do i “switch the stick to xbox mode”? Can´t do anything in the dashboard currently…

eperelez · 2011-11-09T19:17:21.000Z

Pygmalion:

Okay, i got my omni sanwa sticks. I plugged them into my 360, but how do i “switch the stick to xbox mode”? Can´t do anything in the dashboard currently…

Hold down turbo as you plug it in.

Pygmalion · 2011-11-09T19:19:07.000Z

Turbo are the buttons on the upper left, right? I have no idea…

eperelez · 2011-11-09T19:25:52.000Z

Pygmalion:

Turbo are the buttons on the upper left, right? I have no idea…

Yes, top-left is Turbo.

bonggod1 · 2011-11-09T20:17:20.000Z

I would like to thank all of etokki and to Laugh for my first stick build, I got the Joytron Revolution gutted it out and put in it some Sanwa 30mm buttons after I shaved all the holes out, Then I put in a Sanwa JLF-TM-8T-SK with .187 QD, Cut out the top screw holes then fasend it with some of the short screws that u can order at the store as well . Then got the joystick wire harness and button harness.The joy stick harness was super easy to put in, and even the small amount of soldering for the buttons was not bad after a few try"s… So thanks Laugh…for the super fun and afforabul project…

jamesepoop · 2011-11-10T05:12:05.000Z

jmcrofts:

OK so I am having a problem with my Omni. Somehow the mounting plate for the JLF has gotten horribly bent, like 20 degrees or so, and because of this the stick pokes out at a weird leftward angle. Is this a known problem? I’ve had my stick for less than a month.

You’ve had it for a month but you didn’t notice it until now? Sounds like you dropped it. From modding, I can only imagine you had a screw loose and that would bend the plate after you hammered on it.

jmcrofts · 2011-11-10T08:57:33.000Z

jamesepoop:

You’ve had it for a month but you didn’t notice it until now? Sounds like you dropped it. From modding, I can only imagine you had a screw loose and that would bend the plate after you hammered on it.

I began noticing it about a week ago, but I only just opened the case. As far as I am aware I’ve never dropped the stick.

Daopefishh · 2011-11-13T21:53:01.000Z

May i get a template for the japanese version of the omni stick? I was checking the thread but the tampltes say korean edition…

CUTWEST · 2011-11-15T05:10:22.000Z

I tired asking this in Trading outlet with no luck so fuck it, ill just ask it here in the main thread. Anyone out there that modded their Saulabi still have the original generic knock-off K-stick with leaf switches that want to sell / donate it? (ill pay all shipping charges of course) or just a Fanta style compatible battop in general? Any color will do. Thanks.

therobin · 2011-11-15T08:36:41.000Z

CUTWEST, I have the knock fanta stick from my modded wooden stick. I can send it to you for the cost of shipping (should be $8.50CAD if you are in NA).

Also, I wanted to let everyone know I fixed my omni. I mentioned a few pages back that my Omni went completely dead. I has suspicion it was the cable because I had a few disconnect issues before the stick complete died. Today, I cut the stock cable before the wedge where it sits between the case pieces and soldered a new cable to it and it works perfectly. Just an FYI if anyone is having problems with their stick.

Ijiwaru · 2011-11-16T17:37:41.000Z

Ordered an Xtokki converter to use my DS2 on PC, and also having a nice converter for PS2 to 360 if I ever needed it in the future.

Placed the order on the 7th, recieved the converter on the 15th. VERY fast shipping, especially from Asia to Hawaii.

It’s working flawlessly so far on Sonic Generations, BF3, Skyrim etc. on PC after it automatically installed the Microsoft 360 Controller drivers.

Thanks for a great product, great service, at a great price, Laugh.

therobin · 2011-11-19T09:05:10.000Z

Thought I would show this off here. Here is the colour scheme I use with my Omni. I think it is much better than the stock.

http://img577.imageshack.us/img577/9874/dsc1636q.jpg