Just wanted to give people a heads up, since I got my stick today. I believe the PCB in the stick is the Brook PS3/PS4 Fighting Board (and not the Universal Fighting Board). I just tried to update the firmware, and the Universal Fighting Board firmware update failed.
The stick is an absolute beauty.
It is the PS3/PS4 one.
Photos?! I was actually going to order one of these but I was waiting for a question to be answered from them via e-mail, and by the time I got my answer I missed the pre-order by about an hour!
Pics please 
On the Omni product page it lists “Elegant new box design” as a rev.6 feature. I can’t see any difference when looking at hte product image, but for all i know it could be the same old picture used for rev.5.
I’m currently modding my rev.5 stick. Started by covering the interior with adhesive sound dampening foam pads, which helped reduce the slightly hollow sound and reducing the noise from the stick and buttons. Also looking into using something like the neutrik plug for external cable attachment/detachment. If anyone has done i mod like this i would be glad to hear about how it went.
Box as in the box it comes in, not the sticks case.
You’re right. Where is my mind. :facepalm:
Taeyoung Fanta levers coming back?
http://www.etokki.com/Joysticks/Taeyoung-Fanta-stick-Green
EDIT: Just checked my tweet back and here is what Laugh said: “There’s a decent chance, depending the feasibility and demand from fans.
Let us know and put us to work!”
man i have been looking everywhere for these sticks! definitely gonna buy a few of these if they come back.
Old thread along w an even older player who wants to find his way back to the scene.
I found my old Mas stick that I used on PS2 along w the inpin I got from Laugh to convert it to the PS3. Both still work great after years of storage.
My question is: Can anyone verify if the inpin will work with the PS4? I can’t see why not, but since I don’t have a PS4 to test, I crawl back here for some insight.
Thanks in advance
In theory it should in legacy mode on SFV as long as you sync it with a PS4 controller. If you’re just playing at home it’s whatever. If you’re going to a tournament they typically disallow legacy mode.
It’ll also work with a Brook PS3->PS4 converter but I dunno how much lag that’ll add. You could actually get a Brook PS2->PS4 converter as well.
Yo, a soft tension Taeyoung Fanta?
Holy shit. I thought this joystick would never return.
I still have an old green taeyoung fanta laying around. Comes with that hard rubber.
I HATE how hard the rubber is. It’s too much.
There is a new crown sdl-301 joystick coming out as well…
Taeyoung vs Crown much?
I can’t seem to figure out how to make the Etokki Omni use the front row of buttons. It has 4 of them and 3 of them don’t do anything in SFV.
Only the Options/Start button works.
I really need to be able to reset the training mode positions and such in SFV to train effectively.
How do I perform these tasks with this arcade stick?
I tried the “Emulate function” on this page and it is completely useless. All I succeeded in doing was making the lever act as the right analogue stick which of course does absolutely nothing.
(I am using a PC)
@Hassun If you have the latest firmware from Brook you can put the controller into PS4 mode by holding 2P (Y / Triangle button) when you plug in the USB. This will allow you to assign the home and touchpad buttons. I believe you have to do this every time you plug in the controller or after you restart your computer.
Damn, that’s really inconvenient.
Edit: Just tried it, doesn’t work. I cannot assign any of the front buttons on the Etokki to the “push in the analogue stick” function even when I hold down the Y/Triange button while plugging in the stick.
I guess I just learned a $300 lesson to never get an arcade stick that doesn’t have dedicated L3/R3 buttons.
@Hassun It should work when configuring your controller in Street Fighter V (see picture). Have you updated your firmware using the PS3PS4 Fighting Board product downloaded from here? When you set the Omni stick to PS4 mode your controller should show up as a “PS4 Wired Gamepad” under “Devices and Printers” in Control Panel.
I’ll give it another go.
Finally got it to work! You were right about making sure it was showing up as a PS4 controller in Devices and Printers.
Ok so I recently purchased an omni korean stick, I’ve always wanted to try Fanta lever, and transitioning from Sanwa lever, I find it refreshing and compatible even when i play non-tekken games, such as gg and sf.
However, there are a few issues as of now:
Should be no major issue to use it without the plexi
Hey there, I just bought an Omni second-hand, and unfortunately one of the rubber feet on the bottom is missing! Anybody know where to get replacement rubber feet?
Thanks a bunch!
