9061

Thanks for the tip james…

and… A quick update on shipping… Due to the fact that I’ve got a foot of snow on my shop, there may be slight delays to orders from the weekend, maybe a day or two… I will do my best to get everything out as quick as possible, but I’m just letting you know… We’re not supposed to get snow here, lol…

Thanks,

Chad
Lizard Lick Amusements

9062

Ordered 2 Chimp SMD’s on the 23rd, got them today!
Thanks Chad

9063

i am trying to order some sanwa black 30mm snap in buttons but when i change the quantity to more than one it says out of stock. do you really have only 1 button in stock or is this a shopping cart error?

also any idea when seimitsu ls-32-01 will be restocked?

thanks

9064

yo chad, check your PMs.

9065

I should have more black 30’s tomorrow, but it’s probably going to be awhile on the 32-01’s, Sanwa and Seimitsu are closed until next week…

Got it… now check yours, lol…

Thanks guys,

Chad
Lizard Lick Amusements

9066

I would appreciate 100-pack 0.110 Quick Disconnects very much, Chad!

It’s your business, of course, but I really don’t like ordering QD’s one by one. You really can’t have enough of them to begin with…!

It’s been cheaper to get them in those large packs on the Net. When GamingNow.net was operating, I did order a hundred-pack of the 0.110 QD’s. True to modding’s nature, I went through them in probably less than 2 months! On most mods, 16 (8-button) or 20 (20-button) are going to be used.

$7 seems to be normal for 100-packs online. What I don’t like about a bunch of these QD’s is that you don’t always get the ones rated for 22-24 AWG wire. Most of the ones being sold weren’t made for arcade sticks to begin with. I bought blue QD’s that were 0.110 but were rated for 16-18 AWG wire. I don’t think I’d get into trouble with heat issues or other ‘bad stuff’ happening with those but it’s somewhat relieving to get the right QD’s to begin with!

9067

@chad Thanks for the great service you’ve provided. I’ve (so far ;)) only had three orders with you, but they’ve been very quick, and i’ll be doing much more business with you.

The last two orders were put into an SE+sanway+art mod i did for Wife® for xmas.
I don’t know if you’re around much more of the forums here, but this was my first ‘serious’ modding, and with it being all parts from your store, i didn’t know if you’d be interested in seeing the finished product.
You Never Forget Your First Doctor

Along with what GeorgeC said- do you (or will/would you) sell bulk packs of QD’s or fasteners or anything like that? If not, no biggie, there are other places… i’d just like to be able to put all my stick part orders into one basket.

Keep up the awesomeness :slight_smile:

9068

For the JLF do they come with the mounting screws? If not which ones am I supposed to get and can I get them on LL?

Building my Kraylix and I have a ton of questions lol. Been years since I built a stick. And back then it was all Happs.

9069

If you are talking about the screws to mount them to your panel then no. You can go to the hardware store and get 6-32 machine screws and nuts, but it all depends on how the kraylix are constructed.

9070

I have a question for Chad/LL before I get along with New Year’s Eve and make preparations…

IF I wanted to ordered an LS-40-01 with a black shaft cover from you, could I swap the flat mounting plate for an SS-mounting plate?

Most of the joysticks I have are of the TE/HRAP SA/SE kind where the SS-mounting is need to install the LS-32-01 and LS-40-01. LS-32-01 already comes stock with this mounting plate… Could I save the hassle of buying a flat plate I don’t want for the one I need?

Just asking…

(Everybody else — please ask Chad to carry QD’s in at least 100 packs!)

Other than that, forget business this weekend, and have a Safe and Happy New Year’s!

9071

My order shipped the same day for my 8 ps-15 buttons. Thanks Chad!

9072

Ordered Late night on the 30th shipped out 31st… got the last Sanwa OBSF-30 in black/red… wanted 3 but oh well ill just have to make do with black… and then make another order when they are back in stock…

9073

is there an eta on when white seimitsu ps14’s are getting restocked?

9074

Hey, I can only go back so many pages but had a question. Why are there only two choices for shipping? Like…For example, if I am wanting to order 5 24mm Semitsus, I only get two options, Next Day Air Saver and Next Day Air. Like…thats 4 times the cost of the semitsu buttons.

I mean there are a lot of things I wanted to order, and when I try it with the semitsus I get a 65 dollar shipping, If I do just KNserts its 1.44, if I add one FG Widget it jumps back up to 65 bucks.

Edit – Tried going 1 by 1 on semitsus and it removed the USPS option after 3

9075

It looks like there is an issue with the USPS api server not showing Priority Mail rates, I’m checking on it right now, you may want to try to place your order a little bit later in the day…

Thanks,

Chad
Lizard Lick Amusements

9076

Thanks. Yeah i was a little feaked. I need parts…but not THAT fast haha.

9077

any word on plexi cover restocking, Chad?

9078

Still waiting to hear back from Art on the plexi’s…

And I have turned on all the UPS shipping options on the site, since the USPS isn’t getting their api fixed in a very timely fashion…

Thanks,

Chad
Lizard Lick Amusements

9079

Hey Chad. any word on 45mm balltops? an ETA? thanks in advance.

9080

Uh, maybe I’m doing it wrong but…

I’m trying to enter a Canadian zip code but it keeps telling me that it’s an invalid zip code. How do I get the site to understand I’m in Canada?