You silver-tongued bastard, you! 
wowā¦there are so many great custom sticks & great mods in this thread.
Anyways, this is my first stick
http://img17.imageshack.us/img17/2184/initiatorsidehires.th.jpg
http://img17.imageshack.us/img17/8587/initiatortophires.th.jpg
http://img132.imageshack.us/img132/5661/initiatorbackhires.th.jpg
I wanted to buy Sanwa/Seimitsu parts, but since the only ones available in my townā¦are these cheap partsā¦I just started building a custom stick using themā¦
Anyways, spring that came with the stick was so badā¦it broke after I did a few quick Tekken moves several times(which were EWGF& bdcā¦IIRC)ā¦
The spring became loose, and it couldnāt stay in neutralā¦ So, I just looked around the house, and found a spring that could fit in the stickā¦which was one that came from a water pumpā¦ So, the stick now feels very hardā¦ 
================
Btw, Iām planning to build two more sticksā¦but I havenāt got all the partsā¦
http://img156.imageshack.us/img156/9978/t6startersticktophires.th.jpg
http://img36.imageshack.us/img36/5953/t6starterstickisomethir.th.jpg
http://img30.imageshack.us/img30/5241/t6startersticksidehires.th.jpg
(Thatās not a scratchā¦Itās just a reflection)
http://img36.imageshack.us/img36/8190/junsticktophires.th.jpg
http://img42.imageshack.us/img42/3130/junstickbackhires.th.jpg
http://img42.imageshack.us/img42/1702/junsticksidehires.th.jpg
Those look unique, nice job. I especially like the mishima oneā¦
those cases looks almost hori style.
PS3 TE modding complete! Got the image printed off MamesMarquees and like usual itās very high quality and looks better in person! The template is by EvilGordo:
Hey how did you guyās get the screw on siemitsu translucent buttons to fit in the TE stick the top button closest to the stick wonāt screw all the way because A plate on the joystick is in the way. Is there a snap in verson of those buttons?
Hold the nut in place and screw in the button by holding the microswitch
well you have to actually place the nut under that plate or bracket then start screwing from the other side. i have pictures
go here:
http://forums.shoryuken.com/showpost.php?p=6861936&postcount=16
3 new sticks
Hereās three sticks I just got finished.
The 2 metal cases are by NHTRAN328.
All 3 cases were wired by Rtdzign.
Red Yuzen Waves Stick
Black Yuzen Waves Stick
http://i44.photobucket.com/albums/f9/DrkFD3S/P1000268.jpg
And here is the original b15sdm M.Bison stick
http://i44.photobucket.com/albums/f9/DrkFD3S/P1000270.jpg
Dude that red bubble top looks incredible, I just want to take a bite out of it :yawn:
Mmm cherry flavoredā¦
nice u have three awesome cases and sticks congrs dude
dam i want that bision stick u got there spizynoodles
The red rim KN buttons with clear tops taken from ps-14-GN clears. Man you spent a lot of money on that. Looks good though.
I love the finish on that Bison stick. What are the dimensions of it? It looks giant.
benglish, that stick is a masterful work of art!
Took a quick pic for ya.
I donāt know the dimensions so I just took a size comparison pic with the comiccon TE stick.
Overall the TE is longer and taller than the Bison stick.
niceeeeee
Ahh. Thank You. My eyes must have been playing tricks on me. Again beautiful Dictator stick. And props on the Comicon TE. Much more classy looking than the regular TE.
I was thinking the same thing about the sizeā¦ I feel like my eyes are STILL playing tricks on me with that second picā¦if you put them side by side, the bison stick is still taller isnāt it? thereās SO much space between the buttons and the bottom of the stick! or maybe just cuz the edges of the TE are rounded it looks like less? either way, that bison stick is amazing. I saw that one when b15sdm posted it first I think. Love that bottom art.
I remember reading somewhere here that all Ikaruga sticks must be well made. Hereās hoping I didnāt disappoint that tradition.