Check Out My New Arcade Stick! (No Image Quoting)

[Prophestus]

^thats an awesome stick, and theres some really clean amazing sticks in here

[Trexid]

That NES stick is really cool, very creative work with the controller port. My only complaint would be that it’s too light I wouldn’t be able to execute moves efficiently but I can definitely look past that because after all it is a NES!

[System_1]

Trying to modify my arcade joystick . i connected the “x” and “y” button and they are ok and show up on the game. but the “a” and “b” button are not activated. “a” only works on the menu screen. HEEEEEELLLPPPP!!!

[System_1]

That nintendo stick is awesome

[weezy58]

That NES stick is really cool, very creative work with the controller port. My only complaint would be that it’s too light I wouldn’t be able to execute moves efficiently but I can definitely look past that because after all it is a NES!

yeah, that’s true…the first time i tried playing with it, damn stick almost flew off the table trying to do a 360 piledriver. but if you check the pictures i posted, i added those square, lead washers. all in all it weighs a good 3-5 pounds!

[networkingyuppy]

Mod for a friend. Cthulhu and thanks to the person that inspired me to stick something up on the switches. (Wii Fighting stick)

[arthong]

Gundam Mania!

Full TE Gundam Theme… with the works. New Bottom Plexi and Side plexi project.

Side Plexi - also makes taking the Start/Select buttons much easier to take out in the future.

Bottom plexi. It’s like having a big frame!

For those curious about the TE Side plexi, here’s a youtube video on how it works and eases future 24mm swapping for the TE.

[media=youtube]EMS5PIfYyTk[/media]

Now to order Seimitsu Clear 24mm buttons =)

[meus]

Full TE Gundam Theme… with the works. New Bottom Plexi and Side plexi project.

http://www.tek-innovations.com/arthobbies/images/show/gundam//1.jpg
http://www.tek-innovations.com/arthobbies/images/show/gundam//2.jpg

Side Plexi - also makes taking the Start/Select buttons much easier to take out in the future.

http://www.tek-innovations.com/arthobbies/images/show/gundam//3.jpg

Bottom plexi. It’s like having a big frame!
http://www.tek-innovations.com/arthobbies/images/show/gundam//4.jpg

For those curious about the TE Side plexi, here’s a youtube video on how it works and eases future 24mm swapping for the TE.

Now to order Seimitsu Clear 24mm buttons =)

Nice work arthong like always and great job doing almost full custom plexi for TE

[Iduno]

Full TE Gundam Theme… with the works. New Bottom Plexi and Side plexi project.

snip

Side Plexi - also makes taking the Start/Select buttons much easier to take out in the future.
snip

Bottom plexi. It’s like having a big frame!
snip

For those curious about the TE Side plexi, here’s a youtube video on how it works and eases future 24mm swapping for the TE.

[media=youtube]EMS5PIfYyTk[/media]

Now to order Seimitsu Clear 24mm buttons =)

Wow thats awesome, you going to be using it to play that old gundam fighting game on a snes emulater?

[Ikagi-chan]

Wow thats awesome, you going to be using it to play that old gundam fighting game on a snes emulater?

I sure as hell would if I had a Gundam themed Mad Catz FightStick Tournament Edition! :wow:

That’s some seriously epic plexi work you’ve done there arthong! What crazy thing will you offer next for the TE? Plexiglass cable storage door? Plexiglass side bezel replacement? There’s just no stopping you man!

[kelcoach]

Very pleased , thanks ART

Ikaruga HRAP1 - Full Seimitsu inc LS-32 and Buttons , made just for shmups

Also incs DB15 for use with supergun and many project boxes i have

I have a sanwa stick for fighters that will be finished soon

looks like new now and its about 5-6 years old and well used

oh yeah and not to forget the bottom , got that painted too

Insides are pretty tidy but i cant be arsed to up it up again

Thanks :tup:

Dude, that stick is nice. It makes me want one in a similar vein.

[HighOnFiber]

Finished this last night, still thinking about adding some custom art to go with the buttons and balltop.

8 Sanwa OBSF-30’s
2 Sanwa OBSF-24’s
1 Seimitsu clear blue ball top

[PHATAL_PHD]

http://farm3.static.flickr.com/2619/3792440082_bc6bc05415.jpg
http://farm3.static.flickr.com/2152/3791627045_ae86dec2b9.jpg
http://farm3.static.flickr.com/2564/3792441422_b3e998391c.jpg

Finished this last night, still thinking about adding some custom art to go with the buttons and balltop.

8 Sanwa OBSF-30’s
2 Sanwa OBSF-24’s
1 Seimitsu clear blue ball top

Nice to see what you’re playing on Fiber. Looks like you got the same color buttons as i do on my custom stick. How long it take you to get your parts?

[b15sdm]

Hey everyone,

Just finished another stick. This one is for a freind of mine who mains chunli & sakura and wanted something abit funky looking. So I went with some vibrant colours and wood to give it abit of a twist.

This case is only 9.5"wide externally and probably the smallest one I built so far.

It feels damn comfortable stranglet enough!

Again, sanwa parts through out.

http://joystickvault.com/data/873/medium/Chunli_Sakura_2.JPG

http://joystickvault.com/data/873/medium/Chunli_Sakura_1.jpg

http://joystickvault.com/data/873/medium/Chunli_Sakura_3.JPG

http://joystickvault.com/data/873/medium/Chunli_Sakura_6.JPG

http://joystickvault.com/data/873/medium/Chunli_Sakura_4.JPG

http://joystickvault.com/data/873/medium/Chunli_Sakura_5.JPG

[PHATAL_PHD]

sick stick b15…
one question though…where did you get that USB port for the front? i was looking for something like that on my last stick project and couldn’t find one. I also see a few other ppl using them on sticks. So can you tell me where to get them?

but overall…really impressive stick. I like the beveling on the sides, and the dark wood stain. I like how slim it looks too, is there a hacked PCB in there?

[JJL-Z33]

Full TE Gundam Theme… with the works. New Bottom Plexi and Side plexi project.

http://www.tek-innovations.com/arthobbies/images/show/gundam//1.jpg
http://www.tek-innovations.com/arthobbies/images/show/gundam//2.jpg

Side Plexi - also makes taking the Start/Select buttons much easier to take out in the future.

http://www.tek-innovations.com/arthobbies/images/show/gundam//3.jpg

Bottom plexi. It’s like having a big frame!
http://www.tek-innovations.com/arthobbies/images/show/gundam//4.jpg

For those curious about the TE Side plexi, here’s a youtube video on how it works and eases future 24mm swapping for the TE.

[media=youtube]EMS5PIfYyTk[/media]

Now to order Seimitsu Clear 24mm buttons =)

thats really neat. got any shots to see how flush it sits on the case (sides an bottom)?

[b15sdm]

sick stick b15…
one question though…where did you get that USB port for the front? i was looking for something like that on my last stick project and couldn’t find one. I also see a few other ppl using them on sticks. So can you tell me where to get them?

but overall…really impressive stick. I like the beveling on the sides, and the dark wood stain. I like how slim it looks too, is there a hacked PCB in there?

I bought them on Ebay but later found out it can be bought from any good electrical supplier. Its made by “Neutriks” something like that

[PHATAL_PHD]

I bought them on Ebay but later found out it can be bought from any good electrical supplier. Its made by “Neutriks” something like that

thanks man, i found that nuetriks company, hopefully i can find some other place that sells em as well.

[Reyals]

Been a while since I’ve had time to work on sticks but I’m building/modding/putting together a few this week. Iphone pics is all I can do till I get a decent camera. My old sticks are here: http://www.flickr.com/photos/35398677@N05/

First, my wired X360 stick with extra stiff springs and a bat top (just experimenting to see if I like it). Used to have yellow sanwa buttons till I found out two of them were fakes and the other 4 buttons were long switch versions which wasn’t comfortable for me. Btw, using an extension cord with the madcatz X360 pcb won’t register a mic as always being plugged in like it does in the MSFT x360 pcb.

Next, my wireless PS3 stick thanks to Voltech. Sixaxis adapter. 1 scratch/crack on the bottom right but I think I can ignore it . The protective cover over the plexi was perfect when I got it. Probably a manufacturer defect. Also has Neutrik adapter that you can’t see.

Modded PS3 Madcatz TE that I will mod again when I get the time. Currently being used as one of my goto stick at work for BlazBlue/SF4 during lunch/breaks. Blue adapter looking thing in that back is my breakaway cable for when we accidentally trip over the wires while passing controllers lol.

Thanks go to Voltech, TMO, Riotblade, Toodles, ShinJN, arthong, gamingnow.net, Himuragames, Lizardlick, and Akihabrashop for cases and parts. And the people I’ve learned from the past 6 years (I trolled to learn how to build sticks for 5.5 years before finally signing up for an account). =P

[PHATAL_PHD]

lovely sticks reyal!
im really feeling that top one.