@Cyphen Is there a LS RS DP switch on it? Try putting it in DP or LS mode to see if it will work then.
As per your suggestion, I tried all of the steps (including hitting the guide button) with the LS/RS/DP switch changed to each of the three positions. No change. None of the buttons work, either, so I wouldnāt think itās anything to do with a joystick switch. Looking at the photos, it looks like the LS/RS/DP part of the board isnāt even hooked up? Thatās a bit disappointing, if so, but not the problem Iām focused on solving.
Again, Iām happy to try any troubleshooting steps anyone can suggest, or other fixing-suggestions.
20180613
- Input sensitivity improvement
sorry if this is a stupid question, but what exactly does this mean?
@Cyphen I suggested that because on my Panzer, if I put it in RS mode, the directional buttons donāt work, as well as the Start and Home and Share buttons. Its not supposed to do that, ifs just a weird thing. Anyway, I would just go to paradise arcadeshop and order their Brook PS3/4 Fighting board with the breakout board already soldered onto it. Itās cheap if you just play on PS3/4 and PC. Good luck!
Thanks for the suggestion, but my UFB-modded stick works fine on PS3/4. Iām trying to resolve an issue where I canāt get it to work on an Xbox One platform, which the PS3/4 Fighting board would not resolve.
If anyone on this thread can maybe see something wrong with the installation based on the photos, or has any more troubleshooting steps for me to try, Iād appreciate any council you could render!
if you plug it in to a PC without any button held down, what system does it default to?
None! When I hold down 1K I get āPokken Controlerā, when I hold down 2P I get āP 4 Controllerā, etc, just like Iām supposed to. But when I do it with NO button held down (or when I do it with 4P held down) the JOY.CPL list doesnāt populate with anything, even through in both cases itās supposed to populate with āXbox Oneā controller.
I actually shot a quick video of it to share with the Brook guys, and I can link it here: https://1drv.ms/v/s!An08e4nkeCpHhfRPv4YsRaf_CrbleQ
(sorry in advance for my annoying voice).
I also shot a video of the fightstick working fine on my Xbox 360, but not working on my Xbox One: https://1drv.ms/v/s!An08e4nkeCpHhfROPAeXvdB2wp91EA
It really feels like everything except for the Xbox One functionality is working fine. I mean, except for selecting-your-joystick with the LS/DP/RS switch, which I donāt think RoyalFlush hooked up.
Only think I can suggest but itāll be annoying for you, is disconnecting on the screw in and just have power to the board, I feel some wire might be crossed or misplaced. It might be hard for you since you didnāt put this mod together.
When was the last time you updated it?
no need to mod LS/DP/RS, the ufb can do that Left + Start 3 sec LS, UP + Start 3 sec, DP, Right + Start 3 sec RS
Hello everyone,
My brook universal board has issues when in xbox one mode. The home button isnāt consistent at bringing up the xbox one home interface. Itāll work after maybe a random amount of presses or if I hold it sometimes. Also has the same issuewhen trying to activate steam big picture mode on pc when in xbox one mode)
When used in 360 mode on pc I have no issues with activating Steam big picture mode. Also works perfect on my ps3. (No ps4 or xbox 360 to test)
Anyone else have this issue before or am I the first person to use one of these boards on the xbone?
Thanks in advanced.
P.S. Is there anyway to perma lock the pcb into 360 mode so I donāt have to hold the R1 button? Iām primarily on pc so 360 mode is optimal for all the games I play.
How would one change the socd behavior to be forward + back = last input on a UFB?
I get the exact same issue after updating to v23 of the firmware. I had the one with the v5.5 Ps4 fix, but I saw that there was a newer from June with āInput sensitivity improvementsā. My stick works fine on my PS4 and 360 mode on the pc, but the guide button just doesnāt work on Xbox One mode in either PC or on the console. Itās very inconsistent and also seems to affect the joystick once it does register an input on the console. It as if the joystick doesnāt have repeat delay after the guide button input.
Hey dude
I got a hold of brook via their support email. They sent me a beta fix via google drive. Hereās the link.
https://drive.google.com/file/d/1aN20DTnaO0l3JEFVhBmEx3ZItMCg_oxo/view
1 Like
Awesome, thanks a lot! Appears to be working again after that.
1 Like
Is it possible to hook up all buttons (Start/Share/Home/R3/L3/etc) of the Qanba Obsidian to the Brook UFB without the EZ mod? If so, how?
If they use standard button wires, meaning quick disconnects, you can do it. If not youāll need the EZ Mod.
Profound sadness.
Hello, I canāt figure out how the turbo button works and didnāt find anything online about it. Iām using the ufb on a custom stick with Sanwa components
you mean how to connect? or how to make it work?
If you already have it connected to a button just press turbo + the button you want this function to work withā¦
Then press and hold that button to make it autofire.
Thanks, I hooked it up but apparently itās not working, will have to test more
the turbo thing is TBKey or something
Touchpad key es TPKey
Turbo is next to TBLed or somethingā¦ i canāt remember as of right nowā¦ also donāt forget to update your firmware!