Also might be worth checking your soldering to the usb points
@Falkentyne is the same usb cable iām using with my other stick, which also has a brook ps3/ps4 board and works with no issues.
@Dubon the sodering seems fine on surface, will check again though.
well, i changed the usb cord i had soldered between the board and the neutrik connector and all is working good now.
thanks for your help people.
Glad itās working now! Good job.
Does this mean the board doesnāt need to be updated?
Exactly.
@"Shinkuu Tatsumaki"
Yes, doesnāt update anyā¦
Can i use this to replace my cthulu/Chimp boards currently in my 360 stick in order to play on a ps4?
Yep, sure can!
Though if you want X360+XBOne compatibility, you want the full Universal Fight board.
The PC has an xinput mode on the PS3-PS4 fightboard for games like SFV.
yes you can
Awesome! I dont have a xbone so just needs PS3/4 and 360 support.
Just to clarify, this fightboard does not support xbox 360 only pc/ps3/ps4. If you want 360 support look at the Universal Fighting Board.
I thought I mentioned that also, too.
If you need 360 support, you want a UFB, not a ps3/ps4 fighting board.
if you need *Xinput" (360 on PC only) support, fightboard is okay.
Just received my stick customized with seimitsu parts and a brook ps3/4. Wellā¦ It just doesnāt work.
Iāve been trying this and that, and Iāve discovered that thereās a green led that turns on when the stick is conected to the ps4 or pc. When I plug it into the PC and upgrade the firmware, the light turns off and the stick works with no problem, but when I unplug the stick and then plug it again, green light comes again and functional stick goes away.
did you press home once plugged into the ps4
The ps button? Of course.
what does it show up as on PC? joy.cpl
Donāt run the updater first
It shows as a non specified device called Hid Transfer.
Edit: Iāve been looking for joy.cpl, and it explains why I canāt use it on pc. But what for my PS3 and PS4?
Hid transfer means itās in update mode, and expecting you to run the firmware updater. I donāt know if you can bring it out of update mode without running the firmware flasher first. It canāt be used on the consoles while in this mode.