Brook Converters Thread

GOGO.Zippy · 2016-04-09T04:17:43.000Z

Roland_of_Eld19:

hi @GOGO.Zippy - the touchpad emulation (by pressing both analogue stick buttons on the xbox one pad) no longer works for me…

@Roland_of_Eld19
Please look this picture to do and try.

GOGO.Zippy · 2016-04-09T04:21:08.000Z

Best_Vi_Earth:

cant get the second exe to work not sure what im doing IF im doing anything wrong. get the converter updated in the first A no problem but when i get to B nothing happens.

@Best_Vi_Earth
Fix timeout issue…(only updated [ A patch .exe] file) without usd driver and others .exe file.

Roland_of_Eld19 · 2016-04-09T04:33:46.000Z

edit - nevermind i got it working
thanks!

GOGO.Zippy · 2016-04-09T04:41:35.000Z

Roland_of_Eld19:

GOGO.Zippy:

Roland_of_Eld19:

hi @GOGO.Zippy - the touchpad emulation (by pressing both analogue stick buttons on the xbox one pad) no longer works for me…

@Roland_of_Eld19
Please look this picture to do and try.

http://www.brookaccessory.com/Archive/_eng/upload/Xbox360toPS4.jpg

I am using an xbox one pad and i tried following this:

http://www.brookaccessory.com/Archive/_eng/upload/XboxOnetoPS4.jpg

Only the last method words to get the PS4 share menu… the first 3 methods in the image to emulate the touchpad dont work for me

@Roland_of_Eld19
Please give more information (ex: games name …) and how to emulate.
We will confirm with it at the same equipment and reply to you.

If possible, you can compare it between ours and original PS4 controller.

KingRaoh · 2016-04-09T04:46:40.000Z

Is the light in “TE” mode a different color for easy identification? Thanks!

StrtFghtrMstr · 2016-04-09T04:48:23.000Z

KingRaoh:

Is the light in “TE” mode a different color for easy identification? Thanks!

Yes Blue&Red to identify if TO’s require it.

GOGO.Zippy · 2016-04-09T04:48:56.000Z

KingRaoh:

Is the light in “TE” mode a different color for easy identification? Thanks!

@KingRaoh
Turn on Red and Blue two colors in TE mode.

Best_Vi_Earth · 2016-04-09T04:49:41.000Z

ok so do i need pure blue LED to work? its not getting off purple/blue no matter what i do

KingRaoh · 2016-04-09T05:00:06.000Z

StrtFghtrMstr:

KingRaoh:

Is the light in “TE” mode a different color for easy identification? Thanks!

Yes Blue&Red to identify if TO’s require it.

GOGO.Zippy:

KingRaoh:

Is the light in “TE” mode a different color for easy identification? Thanks!

@KingRaoh
Turn on Red and Blue two colors in TE mode.

Thanks!

Brook_Engineer · 2016-04-09T05:05:12.000Z

To all Brook players,

We found some bugs to the firmware Xbox360 to PS4 20160408.
We suggest not update this firmware at the moment.
We will fix it very soon, sorry for any inconvenience.

Brook Team

Krezmasters · 2016-04-09T07:02:21.000Z

Hi @Brook_Engineer

I didn’t see your post and started trying to do the update. I started the ‘A’ exe and input the commands to go into update mode. But then I got a message to “Please plug in controller”, despite the controller still being plugged in. Now the adapter is stuck with both the blue and red LEDs lit. It won’t register any controller plugged into it so I can’t input the commands to change the mode.

Is this related to the bugs you guys found? Do I just need to wait for the fix?

hooyn · 2016-04-09T07:10:14.000Z

HI @Brook_Engineer

I’ve plugged in my PS3 to PS4 converter today to try updating it again with the new firmware and PC isnt even recognising it anymore

In device manager it just says “unknown device”.

Foo · 2016-04-09T07:20:20.000Z

Hi @GOGO.Zippy I downloaded the most recent firmware today for the ps2 to ps3/4 update and Im still getting the 8 minute time out. I’m using a duelshock ps1 controller. The firmware said it updated successfully, and so did the optional tournament firmware. Any ideas why the 8 minute time out is still occurring?

Falkentyne · 2016-04-09T07:21:42.000Z

Krezmasters:

Hi @Brook_Engineer

I didn’t see your post and started trying to do the update. I started the ‘A’ exe and input the commands to go into update mode. But then I got a message to “Please plug in controller”, despite the controller still being plugged in. Now the adapter is stuck with both the blue and red LEDs lit. It won’t register any controller plugged into it so I can’t input the commands to change the mode.

Is this related to the bugs you guys found? Do I just need to wait for the fix?

With the flasher open, remove and reinsert the adapter, with the controller plugged into it, into the USB port.
This should cause the update command to appear on the flasher.

mrArcadeX · 2016-04-09T07:31:29.000Z

hooyn:

HI @Brook_Engineer

I’ve plugged in my PS3 to PS4 converter today to try updating it again with the new firmware and PC isnt even recognising it anymore

In device manager it just says “unknown device”.

Hello. You have the white USB converter right? If you’ve done it before and already have the correct driver installed, then you should be able to connect a Dual Shock 3 to the converter and plug that into your PC. After a while it should come up as ZeroPlus USB device.

Krezmasters · 2016-04-09T07:34:20.000Z

@Falkentyne Ah I could have sworn I tried that, but it did work! I was able to initiate the update… but then the update fails. But at least I was able to get it out of the update mode and back to how it was before. I’ll wait until the bugs are fixed I suppose.

stryderlis · 2016-04-09T07:38:03.000Z

I’m having issues, I can update the firmware but I can’t release the update mode. It goes from blinking blue purple to solid red after option start, then press left stick does nothing, then press left stick and option goes back into blinking blue and purple. I can’t get out of this mode, anyone help??

GOGO.Zippy · 2016-04-09T07:39:24.000Z

Foo:

Hi @GOGO.Zippy I downloaded the most recent firmware today for the ps2 to ps3/4 update and Im still getting the 8 minute time out. I’m using a duelshock ps1 controller. The firmware said it updated successfully, and so did the optional tournament firmware. Any ideas why the 8 minute time out is still occurring?

@Foo
Please update again to try those steps

(1)open app, don’t plug it in USB on PC
(2)press PS key then plugged in USB port
(3)updated icon enable to click
(4)Updated successful

https://youtu.be/Fp8SoNOGPrw

stryderlis · 2016-04-09T07:46:27.000Z

Disregard i got it to work somehow.

Foo · 2016-04-09T08:03:17.000Z

@GOGO.Zippy I have done all thse steps each time still getting 8 minute time out.