all seimitsu ftw!
The circle gate did seem to help with the charge motions, but Iām still not sold on the feel, even with my spring mod. I very well may go the LS-32 route in another week. Iād need to change the template and remove the Sanwa logo, but stillā¦
Note to self: Next time I install screw-in buttons, screw in the middle buttons first. In to out, not the other way around. :grrr:
Can anyone tell me if the Hori Wireless (Tekken 6) for x360 wireless stick can be easily dual-modded with a Sixaxis/Axisdapter?
SIXAXIS is not Common Ground.
So you cannot use it to Dual Mod.
The AXISdapter does make it Common Ground.
What you can do is use the Leo Board from Gummowned.
It turns the SIXAXIS Common Ground, so be able to use for Dual Mod.
http://shoryuken.com/f177/project-leo-sixaxis-wireless-360-dual-mod-194525/
To piggyback off that, I believe thereās a walkthru where Gum did just that:
http://shoryuken.com/f177/360-t6-dual-wireless-stick-mod-219788/
I wish there were quality name-brand Happ/iL sticks made by Mad Catz or other companies so I didnāt have to spend a fortune on custom made Happ/iL sticksā¦
Dr. B makes specialized B-sticks and B-buttons for when the human race evolves beyond locomotion.
Man, I fought that fight on many threads here. Sad, but not gonna happen for too many reasons. Sux to have to go the custom route. But Iāve done 3 and will have to start 2 more soon, so I feel your pain.
In fairness, the fact that commercial sticks suport only Japanese parts likely helps guys like Voltech make an extra bit of money.
not the greatest picture, but a pawn shop was selling this down the street from my work. I might go back and buying it but what platform is it for? SNES? Itās capcom branded.
ah looks like it
might go back and buy it.,
Get it! If youāre lucky itāll be one of the ones with a JLW.
It looks awesome:o
I have one of those capcom sticks laying around somewhereā¦ maybe Iāll open it up and check what its got in it heh.
On a different note, what feasible ways do I have to add one of the Neutrik RJ45 passthroughs into a TE stick? Iām thinking next to the Start/Select or in the Cord compartment, not sure if i have enough clearance space for it there though, and if itāll get in the way of the jlf
I think the way Iāll be recommending from now on is the one Strogq showed me at Evo: Remove the select button, put the neutrick in the Select hole. On the main TE pcb, cut the turbo trace before it gets to the black goop, and solider a fine wire from the turbo button to the Select signal.
You lose turbo (boo-freakin-hoo), and the āused to be turbo but is now selectā button will still be cut off if the lock switch is on.
Hmm, I hadnāt thought of running it that way, and I really like that idea.
Awesome, now I donāt have to worry about making another 24mm hole in the case
You comfy enough to handle the turbo/select rerouting or you need a diagram?
I wish I hadnāt taken the artwork off my SE stick when I first got itā¦
On my TEāI rerouted my START to piggy off the TURBO. So that way pressing the turbo button will activate both, but donāt press any face buttons at the same time or turbo will map to those buttons.
I still like using turbo for Final FightāIām lazy 8^P
If you have a diagram handy, itād be nice to have. Iām sure I could find it on my own, but any help would be cool, Toodles.