i jus remember something, the pushbutton i will order is colored on top, i need a clear one so it wont mess up the picture color of the image and so it will blend in, which is not the ps-14-k i believe and they are the only snap in u have. and they are colored on top. any suggestion?
Ah yes, didnt think about that. Want the PS-14-G-N-Clear instead? If you make up your mind please send an e-mail.
well i would but the prob is, they are screw on, and the review of the madcatz TE stick say the joystick mounting plate will get in the way of the first bottom row left button and thats a concern and i dont know what to do for it. also, i cant use the obsf-30 switch for it either! ARG!!! >_<
Does it not fit with the Seimitsu nut? I know Sanwa nut is out of the question…
[media=youtube]yTFRh1L2aYM[/media]
Hey, I have a question about Seimitsu sticks that maybe you can answer. I have an LS32 with a pinout similar to the JLF, and I tried to install it in a Madcatz SE fightstick. Thing is, all the directions failed to register, excluding ‘down’. I put a JLF in it’s place, plugged in the harness and all the directions worked just fine.
I’m just wondering, is the pinout for the harness on a seimitsu in a different order than on a JLF? Could it be the PCB is just went bad on the stick? I bought it from you like 3 years ago, and never used it. Could be the stick just died of old age and neglect… haha.
Take the connector from your main PCB and put it the way that only down registers, then turn it completely over and plug it in the opposite way. See if that works. I did this on my JLF on accident and had the same problem.
That’s funny I’m 1719
Hey RNG,
Since you haven’t shipped my order, can I add on to it or is that too difficult?
My order number is 1662 and I would like to add:
2 x PS - 14 - G (Black)
2 x OBSF - 24 (Violet)
1 x LB - 35 (Black)
Let me know if this is possible
TheRealNeoGeo have any notice about my preoder? Because have add oder product on list, and have send new email…
my email is: ebayvito@virgilio.it
Hey man he likes to be contacted through emails concerning orders. I too had to add something to my order and he told me this.
Thanks for the heads up.
I’ll try that next time I get a chance. I guess it is backwards, compared to the JLF, then? I can’t check it now, but next time I mod one I’ll try that out.
just placed an order… how do i know what number i am? haha
Click on my account > View the orders I have made.
It will say Order Number: ####
MY gate and buttons arrived today, Thanks a bunch!!! I can’t wait to get my second HRAP3 so I can order even more stuff from you!!!
1735 here…
I made the big mistake of canceling my preexisting order =(
Looking forward to this as my SE stick and its parts are going to shit
Hey Per,
I got my order (1391) today. Yay! However… It seems as though the pictures have on the site for “dark blue” may be outdated? If you look at the pictures of “dark blue” for OBSF-24, OBSF-30, or Meshballs, the picture looks much like what you expect.
But the buttons and meshballs I got look more like a bluish-purple. You have to put quite a lot of light on them to see any kind of blue in them; they appear at first glance to be very purple. It’s definitely not “violet”, as it is far too dark for that. But you can tell from the “dark blue” pictures that there is no hint of purple.
So, my question is… is this just what “dark blue” looks like now? Bluish purple? Or are there still buttons like in the pictures? Thanks!
Grind the nut as mentioned in the video. Flat table + sand paper + seimitsu nut = :woot:
true…but i like how sanwa feels, and i cant swap out the mircoswitch in the seimitsu
PS-14-G-N(clear) for the sanwa mircoswitch in the obsf-30 i believed it was called sw-68. only the seimitsu ps-14-k can, unless u have an idea for me xD