Most Japanese I talk to aren’t very fond of Hori parts in general. Some go so far as to call them straight up trash, which is going pretty far for Japanse people. I see a lot of people buying their controllers though, probably because they’re cheap and readily available, but they always swap out the parts for Sanwas.
My seimitsu lb-39 bubbletop has a grey/white spot at the top is this normal? I’m thinking about exchanging it for another.
Got photos of this?
I’ve seen this mark on photos of the lb-39 but they don’t have a white/grey outline like mine. Here’s a link from paradisearcade and you can see the mark with no white/grey outline. https://paradisearcadeshop.com/seimitsu-lb-39/212-seimitsu-lb-39-red.html
Here’s my balltop. http://tinypic.com/r/zuf2hy/9
I’ve tried rubbing it off with a towel, but the marking remains.
I am not quite seeing it. Try something mild like dish soap and see if you can remove it.
@Opticallever the spot at the top is plastic-flash that’s been cut off after the molding process. That’s normal. I just checked all my Seimitsu bubbletops and they have the same mark.
Don’t get stuck looking for the perfect eggs.
Hi, im aware this is not entirely fightstick related. But I feel very nervous and I have doubts.
I recently got a debit visa card, and since a long time ago, I wanted a SCV stick that was only available (at a reasonable price) in play asia.
There was only 1 left in stock, I really liked that stick, so I asked a friend if I could pay in play asia with my new debit card. So I went in asap and proceeded to do the checkout.
And then, when all done. It came down to this
I just want to know if from here, everything will be alright, I don’t want the mail to get the wrong adress, if that happens, I can talk to play asia and they will help right?, or that something get’s cancelled and I lose my money. It’s the first time I buy stuff from here so… thank you,
On my balltop it has an obvious white outline, I tried cleaning it with some dish soap but it’s still there. The whitish outline doesn’t show up well and the photo. The indentation mark would be fine if it had no white outline around it.
I really don’t see the issue here. It looks fine to me. If you’re unhappy, then just hit them up in the [PAS thread](Paradise Arcade Shop, LED Joysticks, Buttons, Mods and more and see what they can do for you.
What other places do you guys sell arcade stuff on nowadays? The trading outlet is still good but it doesn’t get a whole lot of traffic.
Edit: another question, what’s the deal with the Panthera’s top panel? Is it possible to replace it with a custom one to use a different button layout?
Hi all,
First-time poster, long-time reader of this site.
I have a quick (and hopefully easily answered question): what size are the screws used for the madcatz fightstick pro to secure the plexi down?
I have lost the screws that came included with the plexi from arthong and am trying to put together an xmas present for my wife.
I started my holidays today and thought I would begin the project, however am stuck before I can even begin!!!
Any help would be most appreciated.
Thanks
M4x12mm Hex screws. Note however that the head on those has a 3mm hex drive slot, which might be hard to find (depending on where you’re located on Earth). 2.5mm hex drive headed variants are easier to source (at least in the US), but you’ll need the appropriate hex driver to fasten/loosen. Check Focusattack.com for both screws and the hex driver. I believe they have the screws in 5 colors too.
Are you looking for parts or whole arcade sticks?
Nvm dudes. So far so good.
Just wanted to ask
Can I buy here (trading outlet ofc) a xbox 360 account or licence to get MvCOrigins and MvC2?
They’re not available anymore (only way to get them is to dowload it again through download history) or is it not allowed?.
Also, how much are worth the games and/or accounts?.
Gonna pay through paypal too.
I tried to… Nobody answered. So… I was just wondering. Thanks anyways…
Are you talking about THIS post? You asked about a bunch of stuff.
If you got no answer so long ago…then try posting again there!
Else, you might be better set just creating a “want to buy” (WTB:) thread in the trading outlet. It might get you more exposure.
In any case, it’s time to move this out of tech talk and into the trading outlet
There was also a price check thread. But it seems like it’s dead so, guess I’ll just aask again
Yes I remember this post. No, Im not talking about this one.
Thanks.
Create a Want to Buy thread. Good luck